What Machines are Included in 100MW-200MW Automatic Turnkey Solar Panel Production Line?

We learned that many customers want to build solar panel production line , but they don’t know how to configure the production line and equipment, so that the project has been delayed to start.

So, What Machines are Included in 100MW-200MW Automatic Turnkey Solar Panel Production Line?   

100MW-200MW Automatic Turnkey Solar Panel Production Line Including the following products:

· Solar Cell Tester

· Solar Cell Laser Cutting Machine (no water no destructive)

· Solar  Stringer Machine

· Solar Cell String Lay Up Machine

· Solar Cell String Bussing Machine

· Solar Panel EL Defect Tester with Visual Inspecting Function

· Solar Panel Laminator

· Solar Panel Framing Machine

· Solar Panel IV Tester

1. Factory Layout Drawing:

2. Function & Picture of Main Machines of 100MW-200MW Automatic Turnkey Solar Panel Production Line :

· Solar Cell Tester

Function: 

Use to test the electrical performance of Mono-Si or Poly-Si solar cell pieces and record the results in files.

Picture:   

· Solar Cell Laser Cutting Machine (no water no destructive)

Function: 

No water no destructive solar cell laser cutting machine （called NDC） cuts solar cell into half piece or 1/3 piece，which can increase the output of the solar panel power.

NDC is with lower power, lower temperature, and water-free dicing, and also has higher bending strength, better electrical performance, and no secondary pollution or water-caused micro-broken after cutting.

Picture:

· Automatic Solar  Stringer Machine

Function:  

 Automatic stringer is to weld the solar cells one by one through copper ribbon, and the cells are connected in series to form a string. The entire welding process is fully automated.

Picture:

· Automatic Solar Cell String Lay Up Machine

Function:  

Achieving solar string automatic laying on glass EVA, and transporting module to the next process

Picture:

· Automatic Solar Cell String Bussing Machine

Function:  

Adopt the method of separating the cell string from the glass, and grab the cell string in the air, then to interconnected solder the head, middle and tail bus bar of the middle wire edition module at a certain height; It has the function of a roll feeding bus bar, bending U and L leads upwards.

Picture:

· Automatic Solar Panel EL Defect Tester with Visual Inspecting Function

Function:  

Used in testing the solar cell crack，breakage, black spot，mixed wafers，process defect，cold solder joint phenomenon.

Picture:

· Automatic Solar Panel Laminator

Function:  

Solar panel laminator is a mechanical device that presses multiple layers of materials together.

Picture:

· Automatic Solar Panel Framing Machine

Function:  

Automatic gluing & framing machine is used to install the aluminum frame and automatically overflow glue.

Picture:

· Automatic Solar Panel IV Tester

Function:  

Automatic solar panel IV tester is used to test the electric performance of Mono-Si or Poly-Si solar modules and record the results in files .

Picture:

3. Packaging and transportation of 100MW-200MW Automatic Turnkey Solar Panel Production Line :

4. Case of 100MW-200MW Automatic Turnkey Solar Panel Production Line :