What Machines are  Including In 50-60MW Solar Panel Making Process Manufacturing Solar Panels

How to build a solar plant? Many customers have this idea, but they don’t know what machine they need, so the project did not start.

So, What Machines are Included in 50-60MW Solar Panel Making Process Manufacturing Solar Panels?

50-60MW Solar Panel Making Process Manufacturing Solar Panels Including the following products:

· Solar Panel PV Tester

· Solar Cell Laser Cutting Machine (Damage Free)

· Solar Cell Stringer Machine

· Solar String Lay Up Machine

· 

Interconnection Soldering Machine

· Solar EL Defect Tester with Visual Inspecting Function

· Solar Panel Laminating Machine

· Solar Module Framing Machine

· Solar Panel IV Tester

1. Factory Layout Drawing:

2. Function & Picture of Main Machines of 50-60MW Solar Panel Making Process Manufacturing Solar Panels :

· Solar Panel PV Tester

Function: 

Use to test the electrical performance of Mono-Si or Poly-Si solar cell pieces and record the results in files.

Picture:   

· Solar Cell Laser Cutting Machine (Damage Free)

Function: 

Solar cell laser cutting machine(damage free) cuts solar cell into half piece or 1/3 piece，which can increase the output of the solar panel power.

Solar cell laser cutting machine(damage free) is with lower power, lower temperature, and water-free dicing, and also has higher bending strength, better electrical performance, and no secondary pollution or water-caused micro-broken after cutting.

Picture:

· Solar Cell Stringer Machine

Function:  

Solar cell stringer machine is to weld the solar cells one by one through copper ribbon, and the cells are connected in series to form a string. The entire welding process is fully automated.

Picture:

· Solar String Lay Up Machine

Function:  

Achieving solar string automatic laying on glass EVA, and transporting module to the next process

Picture:

· 

Interconnection Soldering Machine

Function:  

Adopt the method of separating the cell string from the glass, and grab the cell string in the air, then to interconnected solder the head, middle and tail bus bar of the middle wire edition module at a certain height; It has the function of a roll feeding bus bar, bending U and L leads upwards.

Picture:

·Solar EL Defect Tester with Visual Inspecting Function

Function:  

Used in testing the solar cell crack，breakage, black spot，mixed wafers，process defect，cold solder joint phenomenon.

Picture:

· Solar Panel Laminating Machine

Function:  

Solar panel laminating machine is a mechanical device that presses multiple layers of materials together.

Picture:

· Solar Module Framing Machine

Function:  

Used to install the aluminum frame and automatically overflow glue.

Picture:

· Solar Panel IV Tester

Function:  

Solar panel IV tester is used to test the electric performance of Mono-Si or Poly-Si solar modules and record the results in files .

Picture:

3. Packaging and transportation of 50-60MW Solar Panel Making Process Manufacturing Solar Panels :

4. Case of 50-60MW Solar Panel Making Process Manufacturing Solar Panels :